Matrox Maevex 5100 Series Guide de l'utilisateur télécharger pdf (Page 44)

44 Matrox Maevex 5100 Series – User Guide

Networking support



IPv4 support



100/1000 Base-T Ethernet



Streaming protocol: RTSP (RTP, RTCP, and UDP) unicast and multicast



Required command and control network protocols: TCP/IP, UPnP, and HTTPS



CAT 5, 5e, 6, and 7 cables

Notes



Your Matrox product supports EDID v1.3 (monitor settings) and DDC-2B

(Plug-and-Play monitor).



The display resolutions available depend on your monitor and PowerStream settings. For

information on the capabilities of your monitor, see your monitor documentation.



If a decoder uses a stream from an encoder located on a different subnet, the quality of

the video output from the decoder may be degraded.



Playback of content with different audio sampling rates may cause issues with third-

party players (such as VLC).



Network performance and features may vary depending on your networking equipment.

For more information, contact your networking equipment vendor.



When transmitting in multicast on a large network, we recommend using a router with

IPv4 multicast addressing support and switches with IGMP v2 support.



Video capture and streaming of protected content isn’t supported.



Slow response from certain routers may cause a slow PowerStream startup.

Digital flat panel and source compatibility



HDMI compatible



DVI 1.0 compatible (using HDMI to DVI-D adapter)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Pas de commentaire

Matrox Maevex 5100 Series Guide de l'utilisateur Page 44