Matrox FastNIC 10/100 10574-MT-0102 Guide d'installation télécharger pdf (Page 6)

4. Insert the driver diskette into the PC’s floppy drive. Specify the

directory a:\winnt and click OK:

5. By default, the Fast NIC is configured for AutoDetect mode. However,

you can use the Properties window to force the speed and duplex

settings of the card:

Novell NetWare (DOS Client)

To install the driver support software for a Novell NetWare DOS client,

perform the following steps:

1. Copy the contents of the a:\novell directory to the c:\nwclient directory

on the PC:

copy a:\netware\client\dos\*.* c:\nwclient

NOTE:

If necessary, substitute the appropriate directory name if

c:\nwclient

is not the name of the directory containing the NetWare

client software.

2. Use the DOS Edit command to create a batch file called

startnet.bat

that contains the following commands:

c:\nwclient\lsl

c:\nwclient\l100

c:\nwclient\ipxodi

c:\nwclient\vlm

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Matrox FastNIC 10/100 10574-MT-0102 Guide d'installation Page 6