Matrox PJ-4OLP Guide de l'utilisateur télécharger pdf (Page 10)

10 Matrox TripleHead2Go – User Guide

Connect the USB cable

Plug one end of the USB cable provided with

your Matrox product into the USB

connector ( ) on your Matrox product.

Plug the other end of the USB cable into a

powered USB port on your computer. For

more information on powered USB ports,

see your system manual.

Your Matrox product is now connected. Restart your computer and install your Matrox software (see

“Software setup”, page 13).

Connection overview – DualHead setup

* Depending on your graphics hardware, you need to attach either the Matrox HD15-to-HD15 cable or the Matrox DVI-to-DVI

cable to the input connector on your Matrox product.

USB cable

Note:

If your computer doesn’t have a powered USB port, you’ll need a separate adapter.

To purchase a Matrox power adapter for your product, see the Matrox online store

(http://shopmatrox.com

Monitor cable

(DVI)

USB cable

Matrox cable

(DVI-to-DVI)*

Matrox cable

(HD15-to-HD15)*

Input connector

(HD-15 )

Input connector

(DVI )

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

Pas de commentaire

Matrox PJ-4OLP Guide de l'utilisateur Page 10