Matrox Mura MPX-4/4 Guide de l'utilisateur télécharger pdf (Page 18)

18 Matrox Mura MPX Series – User Guide

Mura MPX-4/0

– Attach your KX20 to

quad-DVI cable to the connector on the

bracket of your Matrox card. Make sure the

connectors are properly fastened.

2 Connect your monitors

If your monitor has a DVI connector,

connect your monitor cable directly to your

KX20 to quad-DVI cable.

If your monitor has an HD-15 connector,

use a DVI to HD-15 adapter included with

your product to connect your monitor cable

to your KX20 to quad-DVI cable.

Your Matrox card is now installed. Restart your system and install your Matrox software (see

“Installing your software”, page 27).

KX20 to quad-DVI

cable (KX20)

Monitor

connector

(HD-15)

Monitor

connector

(DVI)

KX20 to

quad-DVI

cable (DVI)

DVI to HD-15

adapter

Note:

Monitors are numbered

consecutively based on which connector

each is attached to, starting with

connector labeled

KX20 to quad-DVI cable

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 56 57

Pas de commentaire

Matrox Mura MPX-4/4 Guide de l'utilisateur Page 18