Matrox Mura MPX-4/4 Guide de l'utilisateur télécharger pdf (Page 8)

8 Matrox Mura MPX Series – User Guide

Connecting your monitors

You can connect up to four (4) monitors at a time to each Mura MPX card, depending on your

product. For more information on connecting your Mura product, see the “Connection setup”

section for the card you want to connect.

Monitors are numbered consecutively based on

which connector each is attached to. For example,

the monitor attached to the connector labeled

the cable is identified as

, the monitor attached to

the connector labeled

on the cable is identified as

and so on.

To facilitate the setup of your multi-display layout,

we recommend connecting your monitors consecutively and arranging your monitors in pairs.

Using PowerDesk to manage your multi-display layout

In a multi-card setup using Matrox Mura MPX cards, PowerDesk assigns letters to the GPU and

numbers to the outputs associated with that GPU.

In the examples below, the order of the first card (4 outputs) is set as

, so its GPUs are identified as

and

. The four monitors connected to the first card are then identified as

, and

, which

correspond to the monitors attached to connectors labeled respectively

, and

on your KX20 to

quad-DVI cable.

Using a multi-display layout with an even number of columns

This multi-display layout shows a 6

4 display wall. In this case, monitors are paired and follow each

other sequentially from left to right (for example,

, and so on).

KX20 to quad-DVI cable

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 56 57

Pas de commentaire

Matrox Mura MPX-4/4 Guide de l'utilisateur Page 8