Matrox Mura MPX-4/4 Guide de l'utilisateur télécharger pdf (Page 42)

42 Matrox Mura MPX Series – User Guide



When handling a card, carefully hold it by its edges and avoid touching its circuitry.



Always try to insert or remove your card as straight as possible.

Installing your card

1 Choose an expansion slot

Most systems have different types of

expansion slots. Choose a PCI Express®

(PCIe®) ×16 slot. Your system manual

should identify the location of each type of

expansion slot in your system.

2 Insert your Matrox card

Position your Matrox card over the

expansion slot you’ve chosen.

Push the card in firmly and evenly until

it’s fully seated in the slot.

Secure the bracket of your Matrox card

to the frame of your system.

Connecting your output devices

This section explains how to connect your output devices (monitors) to your P690 card.

Before you begin

To avoid possible problems that could damage your monitors or prevent you from using your Matrox

product, read the following guidelines before connecting your Matrox graphics hardware.



Whenever you change your connection setup, make sure you’re using the correct

connectors and that all connectors are properly fastened.



Whenever you restart your system, make sure your monitors are already turned on.

Otherwise, the software may not be able to properly detect your monitors.

(Back of system)

(×4)

(×16)

(×8)

(64-bit)

PCI

slots

PCI Express

slots

(32-bit)

(×1)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 56 57

Pas de commentaire

Matrox Mura MPX-4/4 Guide de l'utilisateur Page 42